How to buy tire changer machine
Today, I will provide you with a guide to the purchase of tire tyres, hoping to help some friends who are buying equipment.

(1) Pay attention to the rated power of the motor.
The higher the power, the stronger the work stability. The power of the motor is generally more than 1000W. In order to reduce the cost, some manufacturers use 800W motor, the stability of the work is much worse. Investors can choose when purchasing. Open the cover and check the rated power of the motor. The motor should have low noise during operation and no obvious vibration.

(2) The noise is low during operation and there is no obvious vibration during load
The reducer is the speed reducer for the transmission of the tire changer. Since the speed of the AC motor is generally above 100r/min, it must be reduced to about 100r/min through the reducer to work normally. The reducer is usually made of special materials and alloys. Made of materials, the transmission must have low noise and good balance performance. Some small tire changer manufacturers use low-quality hard alloy casting reducers, which are noisy during operation and pay more attention when loading.

(3) The quality of the tire disassembly head is also directly related to the quality of the tire disassembly.
At present, there are two kinds on the market; one is made of high quality steel and the price is more expensive; the other is made of plastic material, the price is relatively low, which is easier to identify when purchasing. A high quality steel cast tire disassembly head, The market price is about 800 yuan, and the ordinary one is 300 yuan. The curved design curve is more scientific. It is easy to be deformed after many years of use. It is smooth when loading and unloading tires, and protects the rim and tire from damage. The inferior tire is demolished. The head is not the same, the appearance is rough, the curved curve design is not reasonable, the loading and unloading tires are not smooth, it is easy to deform after repeated use, and it is easy to scratch the tires and rims. Therefore, the tires should be loaded and unloaded on site when purchasing. To verify the pros and cons of the disassembly head.

(4) To buy products from well-known companies.
At present, some automotive maintenance equipment products on the market are not high in technical content. There are many unqualified processing factories. The equipment that can be produced can be sold to the market. This equipment can not be purchased, the quality is not guaranteed, and the repair rate is high.