1.Clean the surface of the wound that needs to be replenished, make a mark

2. The surface of the wound is roughened with a sander, the area is slightly larger than the wound.
3. Apply the glue mixed with raw rubber and gasoline (or use hot glue) evenly on the hairdressing area with a brush.
4. Cut the appropriate size of the raw rubber and fill it on the wound. If the wound is larger, overlap the raw rubber.
5. Press the hot head on the raw rubber (if possible, put a thin layer of aluminum or iron on the raw rubber), align the wound with the center of the hot head, press the screw and fix the tire.
6. At the end of vulcanization (about 10 minutes, depending on the vulcanization area), manually turn off the power switch, loosen the tire screw, remove the tire, and complete the entire tire repair process.

Tire vulcanizing machine