The High Quality Tire Changer S-T598

Engineering tire scraping machine is a mechanical tool for scraping large tires. Can pick up buses, trucks, and agricultural vehicles. Industrial vehicle tires. Hydraulic system, perfect for tire disassembly and assembly with only one person, low labor intensity, and high efficiency. Mobile low-voltage control handle for operation. Stable and safe operating voltage.

The High Quality Tire Changer S-T598

1. Used for the disassembly and assembly of deep groove wheels, vacuum tires, and pressure ring tires for buses, trucks, agricultural vehicles, and industrial vehicles.
2. The tire removal arm is fully automatic for lifting and moving forward and backward.
3. The tire dismantling tool can rotate, and the disc core shaft on the tool head is designed with rolling bearings. Even with high tire resistance during operation, the tire can rotate freely.
4. Equipped with a hydraulic driven drag plate, the tire can move left and right on the disassembly and assembly machine without the need for manual labor.
5. Lightweight and portable operating table, convenient for observation from various angles during operation to prevent accidental operation.
6. Dual speed spindle motor to improve tire removal efficiency.
7. The lifting arm oil cylinder serves as the center support and is equipped with a safety protection switch.

Preparation before tire removal
1. Be prepared for lubrication before removing the tire.
2. Before removing the tire, it is necessary to confirm whether the voltage is the machine voltage.
3. Fix the steel rim before removing the tire.

Dismantling of pressure strip tires
1. Move the tire onto the four jaw universal fixture.
2. Adjust the machine and secure the tire wheel steel with a four jaw universal fixture.
3. Apply lubricating oil and move the assembly arm to the side of the tire pressure strip. Use the assembly plate to lean against the tire and rotate it to completely detach the tire mouth from the steel rim.
4. Use a pressure bar extractor to extract the pressure bar, and use an assembly plate to rotate and remove the pressure bar.
5. Move the assembly arm to the inner side of the tire, rotate the tire while moving the assembly disc outward, and pay attention to protecting the outside of the valve.

Installation of pressure strip tires.
1. Manually load the tire onto the steel rim.
2. Move the assembly arm to the outside of the tire and use the assembly plate to hold the tire tightly.
3. Use an assembly plate to install the steel ring pressure strip.

Frequently asked questions:
If you accidentally make a small hole in the tire, you can use the broken area chart butter.
2. When installing the tire on the tire scraping machine, scrape the edges of the tire one by one. First, adjust the bird head of the tire scraping machine accurately. When installing the tire, use professional liquid to evenly coat the tire lip.
3. When installing a tire, it is easy for the tire to slip out. The starting point must be pressed down continuously, and it must be pressed into the deepest groove.
4. The tire scraper is prone to damaging the tire lip, and the general problem is insufficient lubrication.