1、 Before use, remove the appliances and sundries that hinder the operation near the elevator, and check whether the operating handle is normal.

2、 The operating mechanism is sensitive and effective, and the hydraulic system is not allowed to crawl.

3、 When erecting the vehicle, the four supporting angles should be on the same plane, and the height of the supporting angle rubber pad should be adjusted to make it contact the supporting part of the vehicle chassis.

4、 When supporting the vehicle, the vehicle should not be supported too high, and the rear four brackets should be locked.

5、 After the lift vehicle is driven in, adjust and move the lift support block to the specified lifting point of the vehicle.

6、 When lifting, the personnel should leave the vehicle. When lifting to the required height, the safety lock pin must be inserted to ensure safety and reliability before the operation under the vehicle can be started. Four column car lift, car lift, rail lift goods

7、 Except for the minimum maintenance and minor repair items, other cumbersome and heavy operations are not allowed to operate and repair on the lifter.

8、 The lifter shall not take off and land frequently.

9、 When erecting the car, the lifting should be stable and the landing should be slow.

10、 It is forbidden to lift when someone is working.

11、 If it is found that the operating mechanism is not working properly, the motor is not synchronized, the bracket is uneven or the hydraulic part leaks oil, it is necessary to report for repair in time and do not operate with diseases.

12、 After the operation, the sundries should be removed and the area around the elevator should be cleaned to keep the site clean and tidy.

13、 Regularly (half a year) remove the water in the oil cylinder and check the oil quantity. If the oil quantity is insufficient, the pressure oil of the same brand should be filled in time. At the same time, check the lubrication, transmission gear and seam strip.

The purpose of car lift can be divided into four-wheel positioning type and flat plate type according to its function; According to the different space occupied, it can be divided into aboveground type and underground type; The above ground type does not need to dig a slot, and is suitable for any repair shop. Some floors are not suitable for installing two column machine and ordinary four column machine. However, the machine has a wide contact with the floor, so it can be installed on any floor that can be driven to solve customer site problems.

The biggest advantage of scissor lift is that it does not occupy space and is convenient to use. The disadvantage is that it has strict requirements for oil replenishment balance and needs to be equipped with a control box, which is expensive.