Tire changing machineare used to install and unload tires for cars. They can replace tyres for different vehicles such as cars, motorcycles and heavy trucks. Tire removal machines are divided into several models. There are special-purpose car tyre changing machines, large-car tyre changing machines, and some tyre changing machines can be used to remove explosion-proof tyres. Therefore, it is necessary to first understand the tyre changer tyre removal techniques.
1. For soft and thin tires but with good top rubber: When skimming with a pneumatic chipper, lift the air shovel control pedal a little while pushing the tire in, making sure that the spatula contacts the tread, and then use the leg or the real With your hands on it to prevent the tires from retreating, you can step on the control pedal and it is easier to shovel the tires.

2. For tires with a harder tread: When removing a tire, use a spring steel plate for the trolley. A self-made elongated crowbar can be used for the abortion of the bird's head to make it easier to use. When you are on the upper tire, use your hands to press on the belly of the tire, approximately 200mm or so. When the tire is in the tightest position, use your right arm elbow to firmly press the tire. At the same time, push the tire clockwise with the left hand to prevent the motor and the belt from slipping. It also protects the motor well.

3. For tires that run for a long time: the tires are subjected to internal pressure for a long time, and the heat generated by friction between the tires and the ground causes the tires to adhere to the steel rims. When the wind shovel is difficult to shovel, you can choose to dissolve the detergent in water. Use a small brush to brush some solution on the bead and rim. After the solution infiltrates into the gap between the bead and the rim, use a wind shovel. Scoop tires.