Three-point use of large tire changer
1. For tyres with good but soft and thin tyres: When skimming with a pneumatic chipping shovel, lift the pneumatic shovel control pedal slightly and push the tyre inwards. Make sure that the shovel is in contact with the tyre, then use the leg. Or hand to live, to prevent the tire from retracting, and then step on the control pedal, then it is easier to shovel the tire.
2. For tires with long sports cars: tires are subjected to internal pressure for a long time, and the heat generated by friction between the tires and the ground causes the tires to adhere to the steel rims. When the air shovel is difficult to shovel, you can first dissolve the detergent in water, use a small brush to brush some solution at the bead lip and steel ring, wait until the solution infiltrate the bead lip and steel ring gap, and then use the wind shovel shovel Under the tires.
3, for the hard tire tires: abortion is best to use a car spring steel plate, homemade long crowbar to the bird head abortive, easier. When you are on the upper tire, use your hands to press the belly of the baby. When the difference is about 200mm, and the tread is at the tightest point, use the right elbow to press the belly of the baby. At the same time, the left hand will follow the trend and push the tire clockwise to prevent the motor and the belt from slipping. It also protects the motor.