Tires, to transfer the vehicle's traction, braking force and lateral force. At the same time, we should also absorb and reduce the vibration and impact from the road, so as to protect the safety and comfort of vehicles. Therefore, the quality of tires can not be slacked every minute. As a result, the repair and replacement of tires has become a more frequent job for tire shops. As an indispensable tool for tire repair and replacement, tire stripper plays an important role in the whole process. But it's more expensive, so people need to be more careful in use and maintenance——

Tips:

The tire dismounting machine is a necessary equipment for a tire shop. When using the tire dismounting machine, you will have some skills to facilitate your use

1. For the soft and thin tire with good top rubber: when using the air shovel to shovel the tire skidding, slightly lift the control pedal of the air shovel, push the tire inward at the same time, make sure that the shovel mouth is in contact with the tire mouth, and then use your legs or hands to prevent the tire from returning, and then step on the control pedal, so it is easier to shovel the tire.

2. For the long-time tire of sports car: the tire is subject to the internal pressure for a long time, and the heat generated by the friction between the tire and the ground causes the tire to bond with the rim. When it is difficult to remove the air shovel, first dissolve the detergent in water, use a small brush to brush more solution at the tire lip and rim, and then remove the tire with the air shovel after the solution seeps into the gap between the tire lip and rim.

3. For the tire with hard tire opening: it's better to use the car spring plate when picking the tire, and use the self-made extended crowbar to pry the tire opening at the bird's head, which is easier. When loading the tire, press the tire belly with both hands. When the difference is about 200 mm and the tire mouth is at the tightest position, press the tire belly with the right elbow. At the same time, push the tire clockwise with the left hand to prevent the motor from slipping with the V-belt and protect the motor.

Maintenance:

1. The turntable shall be kept clean, and the use of the rotary table shall be cleaned with clean gasoline every week and greased.

2. Clean and lubricate the friction parts which are frequently moving.

3. The air filter and oil mist should be checked frequently, and the condensate in the filter precipitation cup and the lubricating oil in the oil mist device should be drained in time to protect the cylinder.

4. Check the tightness of the transmission belt in the box frequently and adjust it.